Ring & Plug Thread Gages  
 
Call 616 954 6581 for Thread Gages
About Ring & Plug Thread GagesUsed - Surplus Ring & Plug Thread GagesRing & Plug Thread Gage Technical InformationRing & Plug Thread Gage CatalogsContact Ring & Plug Thread GagesBookmark

 

 
 
 
 
 

Medi-Luer ISO 80369-7 (ISO 594) Medical Luer Gages

     

Medi-Luer ISO 80369-7 (ISO 594) Medical Luer Gages

ISO 80369-7:2016 Foreword:
ISO 80369-7 cancels and replaces the first edition ISO 594-1:1986 and the second edition of ISO 594-2:1998, clauses, subclauses, tables, figures, and annexes of which have been consolidated and technically revised.

NOTE:
ISO 80369-7 does not define any gages. Use these ISO 594/1 conical gages to test ISO 80369-7 connectors.
The below listed fitment screw thread gages are specific to ISO 594 or ISO 80369-7 as indicated.

     

ISO 80369-7
(ISO 594/1 Fig 3a
)

US$1,300.00

 

ISO 594/1 Fig 3A
Video & Pics

Ring Gauge
For size testing of rigid male conical fittings
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3a
)

US$2,140.00

 

ISO594-1 Fig 3a or 3b ring gage with handle
Video & Pics

Ring Gauge with Handle
For size testing of rigid male conical fittings
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3a
)

US$2,810.00

 

ISO 594/1 Figure 3a or 3b Luer Cone Ring Gauge with 5 Newotn Weight
Video & Pics

5 Newton Weighted Ring Gauge
For size testing of rigid male conical fittings
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3b
)

US$1,300.00

 

ISO594-1
Video & Pics

Ring Gauge
For size testing of semi-rigid male conical fittings
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3b
)

US$2,140.00

 

ISO594-1 Fig 3a or 3b ring gage with handle
Video & Pics

Ring Gauge with Handle
For size testing of semi-rigid male conical fittings
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3b
)

US$2,810.00

 

ISO 594/1 Figure 3a or 3b Luer Cone Ring Gauge with 5 Newotn Weight
Video & Pics

5 Newton Weighted Ring Gage
For size testing of semi-rigid male conical fittings
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3c
)

US$1,220.00

 

I1Fig3C
Video & Pics

Plug Gauge
For size testing of female conical fittings of all materials
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

ISO 80369-7
(ISO 594/1 Fig 3c
)

US$2,220.00

 

I1Fig3C
Video & Pics

5 Newton Weighted Plug Gauge
For size testing of female conical fittings of all materials
More Information

Calibration:
Manufacturer's unaccredited Long Form Certification
is included, but for ISO 17025 Calibration Certificate
add US$250 and add 3 weeks to lead-time.

     

On Above Gages We Provide:
- DUO-Marked (ISO-80369-7 and ISO 594) Gages
- DUO-Certified (ISO-80369-7 and ISO 594) Gages

For Existing Gages We Offer DUO-Marking And DUO-Certification Service:
DUO-Remarking/DUO-Recertification Service (ISO-80369-7 and ISO 594) for existing Gages and Reference Connectors
.
NOTE: The Screw Thread Fitment Gages can not be DUO-marked or DUO-certified.

The Below Fitment Screw Thread Gages Cannot Be DUO-Marked Or DUO-Certified.

     

ISO 80369-7
B.3 and B.4
Thread Plug Gages

US$720.00

 

GO/NOGO Style Thread Plug Gage for the internal Thread on the male Luer Connector
Video & Pics

ISO 80369-7 Fig B.3 and B.4
GO/NOGO Chrome Fitment Work Plug Gages

For fitment testing of the ISO 80369-7 Figures B.3 and B.4 female screw thread in the collar surrounding the male conical fittings.
More information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. This GO/NOGO Chrome Fitment Work Plug Gage will test ISO 80369-7 Figure B.3 and B.4.
2. Both the GO and the NOGO gage members have C'Bore to clear the ISO 80369-7 male Luer cone.
3. ISO 80369-7 does not prescribe or define these gages. ISO 80369-7 does not suggests using any gages like this. Using these gages is not a requirement of ISO 80369-7.
3. Usually gages and reference fittings for ISO 80369-7 are made of Hardened Stainless Steel, but these gags are made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.

     

ISO 594/2
Thread Plug Gages

US$720.00

 

GO/NOGO Style Thread Plug Gage for the internal Thread on the male Luer Connector
Video & Pics

ISO 594/2 GO/NOGO Chrome Fitment Work Plug Gages
For fitment testing of the ISO 594/2 female screw thread in the collar surrounding the male conical fittings.
More Information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. Both the GO and the NOGO gage members have C'Bore to clear the ISO 594/2 Luer cone.
2. ISO 594/2 does not prescribe or define this gage and does not suggest using any gage like this. Using this gage is not a requirement of ISO 594/2.
3. Usually gages and reference fittings for ISO 594 are made of Hardened Stainless Steel, but this gage is made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.

     
ISO 80369-7 B.5
Thread Ring Gages

US$2,320.00

 

GO/NOGO Style Thread Ring Gages for the external thread of Female Luer Connector
Video & Pics

ISO 80369-7 Fig B.5 GO/NOGO Chrome Fitment Ring Gages
For fitment testing of the ISO 80369-7 Figure B.5 male screw thread located on the female conical fitting.
More information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. These GO/NOGO Chrome Fitment Ring Gages will test ISO 80369-7 Figure B.5.
2. ISO 80369-7 does not prescribe or define these gages. ISO 80369-7 does not suggests using any gages like this. Using these gages is not a requirement of ISO 80369-7.
3. Usually gages and reference fittings for ISO 80369-7 are made of Hardened Stainless Steel, but these gages are made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.
4. These GO/NOGO Fitment Ring Gages are supplied with the matching Master Plug Gages. One set of Master Plug Gages can accommodate many sets of Fitment Ring Gages.

     
ISO 80369-7 B.6
Thread Ring Gages

US$2,320.00

 

GO/NOGO Style Thread Ring Gages for the external thread of Female Luer Connector
Video & Pics

ISO 80369-7 Fig B.6 GO/NOGO Chrome Fitment Ring Gages
For fitment testing of the ISO 80369-7 Figure B.6 male screw tabs located on the female conical fitting.
More information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. These GO/NOGO Chrome Fitment Ring Gages will test ISO 80369-7 Figure B.5.
2. ISO 80369-7 does not prescribe or define these gages. ISO 80369-7 does not suggests using any gages like this. Using these gages is not a requirement of ISO 80369-7.
3. Usually gages and reference fittings for ISO 80369-7 are made of Hardened Stainless Steel, but these gages are made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.
4. These GO/NOGO Fitment Ring Gages are supplied with the matching Master Plug Gages. One set of Master Plug Gages can accommodate many sets of Fitment Ring Gages.

     
ISO 80369-7 B.7
Thread Ring Gages

US$2,320.00

 

GO/NOGO Style Thread Ring Gages for the external thread of Female Luer Connector
Video & Pics

ISO 80369-7 Fig B.7 GO/NOGO Chrome Fitment Ring Gages
For fitment testing of the ISO 80369-7 Figure B.7 male screw tabs located on the female conical fitting.
More information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. These GO/NOGO Chrome Fitment Ring Gages will test ISO 80369-7 Figure B.5.
2. ISO 80369-7 does not prescribe or define these gages. ISO 80369-7 does not suggests using any gages like this. Using these gages is not a requirement of ISO 80369-7.
3. Usually gages and reference fittings for ISO 80369-7 are made of Hardened Stainless Steel, but these gages are made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.
4. These GO/NOGO Fitment Ring Gages are supplied with the matching Master Plug Gages. One set of Master Plug Gages can accommodate many sets of Fitment Ring Gages.

     
ISO 80369-7 B.8
Thread Ring Gages

US$2,320.00

 

GO/NOGO Style Thread Ring Gages for the external thread of Female Luer Connector
Video & Pics

ISO 80369-7 Fig B.8 GO/NOGO Chrome Fitment Ring Gages
For fitment testing of the ISO 80369-7 Figure B.8 male screw tabs located on the female conical fitting.
More information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. These GO/NOGO Chrome Fitment Ring Gages will test ISO 80369-7 Figure B.5.
2. ISO 80369-7 does not prescribe or define these gages. ISO 80369-7 does not suggests using any gages like this. Using these gages is not a requirement of ISO 80369-7.
3. Usually gages and reference fittings for ISO 80369-7 are made of Hardened Stainless Steel, but these gages are made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.
4. These GO/NOGO Fitment Ring Gages are supplied with the matching Master Plug Gages. One set of Master Plug Gages can accommodate many sets of Fitment Ring Gages.

     
ISO 594/2
Thread Ring Gages

US$2,320.00

 

GO/NOGO Style Thread Ring Gages for the external thread of Female Luer Connector
Video & Pics

ISO 594/2 GO/NOGO Chrome Fitment Ring Gages
For fitment testing of the ISO 594/2 male screw thread or tabs located on the female conical fitting.
More Information.

Calibration:
The manufacturer's ISO 17025 (A2LA) Calibration Certificate is included.

NOTES:
1. ISO 594/2 does not prescribe or define this gage and does not suggest using any gage like this. Using this gage is not a requirement of ISO 594/2.
2. Usually gages and reference fittings for ISO 594 are made of Hardened Stainless Steel, but this gage is made of Hardened Tool Steel and all-over coated with Chrome to inhibit rust. This gage should not be sterilized.
3. These GO/NOGO Fitment Ring Gages are supplied with the matching Master Plug Gages. One set of Master Plug Gages can accommodate many sets of Fitment Ring Gages.

 

Lead-Time: 1 to 8 Weeks* after receipt of order to shipment
* Lead-time varies based upon stock level and current commitments at the time we receive your order.
Payment Terms: Credit Card (Visa, MasterCard, Discover, American Express)
Freight Terms: Freight Collect to your account, FOB: Shipping Point in USA
Prices revised May 25, 2017 but subject to change without notice.

 

Disclaimer:
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents: ISO594/1; ISO 594/2; ISO80369-7; and ISO80369-20; which are copyrighted documents. 
To purchase copies visit an Authorized Reseller.

Comments:
Original Posting: 9/9/2014
Last Revision: 5/25/2017
Error corrections in, or comments about, the above data can be sent to: gageguy@gagecrib.com


 

 

 

About UsUsed SurplusTech InfoCatalogsContact UsBookmark
 

 

Top

Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583
CONTACT  FORMS & INFO

Copyright © 2002-2017 Ring & Plug Thread Gages. All rights reserved.