Calibration of ISO 594 Luer Reverence Fittings and Luer Gages

Cleveland Specialty Inspection Services
Calibration of ISO 594 Luer Reference Fittings and Luer Gages is now available by Cleveland Specialty Inspection Services. Cleveland Specialty Inspection Services is an A2LA Audited, ISO 17025 Calibration Laboratory which has ISO 594 Luer Reference Fittings and Luer Gages listed in their ISO 17025 Registration Scope.

This is a unique thing. As of this writing I know of no other ISO 17025 Registered Calibration Laboratory with ISO 594 Luer Reference Fittings and Luer Gages listed in their ISO 17025 Registration Scope. This means that Cleveland Specialty Inspection Services is now the worldwide authority on measurement of ISO 594 Luer Reference Fittings and Luer Gages.

Not all ISO 17025 Registered Laboratories are equal. The difference between ISO 17025 Registered Laboratories can be found it their ISO 17025 Registration Scope. Many people mistakenly claim that the calibration results returned on their ISO 594 Luer Reference Fittings and Luer Gages measured at an ISO 17025 Registered Laboratory are accurate just because the laboratory is ISO 17025 Registered. Care must be taken to check the capabilities of the calibration laboratory as identified in the ISO 17025 Registration Scope.

Because of the tight tolerances specified on ISO 594 Luer Reference Fittings and Luer Gages their calibration is very exacting work which requires skilled technicians and precise equipment to accomplish. Furthermore; the ISO 594 specified design of the gages requires a measurement technique which is atypical for taper gages. When measured with similar techniques at various laboratories ISO 594 Luer Reference Fittings and Luer Gages prove difficult to return concurring results. The results become widely divergent when uninformed laboratories apply conventional taper measurement techniques and equipment.

If accurate measurement of your ISO 594 Luer Reference Fittings and Luer Gages is important to your company, or if there is a measurement dispute concerning the measurement of your ISO 594 Luer Reference Fittings and Luer Gages, send the ISO 594 Luer Reference Fittings and Luer Gages to Cleveland Specialty Inspection Services and have the ISO 594 Luer Reference Fittings and Luer Gages measured by the authority in ISO 594 Luer Reference Fitting and Luer Gage calibration.

COMMENTS
Original Posting: 12/19/2011
Last Revision:
Error corrections in, or comments about, the above data can be sent to: gageguy@gagecrib.com.