Ring & Plug Thread Gages  
 
Call 616 954 6581 for Thread Gages
About Ring & Plug Thread GagesUsed - Surplus Ring & Plug Thread GagesRing & Plug Thread Gage Technical InformationRing & Plug Thread Gage CatalogsContact Ring & Plug Thread GagesBookmark

 

 
 
 
 
 

Enersol Air Leak Test Machine

 

ENERSOL AIR LEAK TEST MACHINE for ISO 594 and ISO 80369

Air Leakage Test Machine
The Enersol Air Leakage Test Machine is designed to be compact and easy to operate. The Air Leakage Test Machine is made from anodized aluminum and plastic components. The Air Leakage Test Machine requires a vacuum pump capable of -100kPa which Enersol typically supplies (110-220V DC). The Air Leakage Test Machine has an integral pressure gauge which comes with a calibration certificate.

The Air Leakage Test Machine is required for leakage and performance tests such as those defined in ISO594-1, ISO594- 2, ISO7886 series (Parts 1-4) ISO8537 and ISO 80369-20. Other standards such as ISO7864 also require the Air Leakage Test Machine by way of requiring components of the test samples to comply with the clauses in ISO594-1 or ISO594-2.

Uses for the Air Leakage Test Machine
Below is a list of tests which are best accomplished by using the Air Leakage Test Machine.

ISO 594/1 Air Leakage Test as defined in paragraph 4.3
To conduct the Air Leakage Test found in ISO 594/1 paragraph 4.3 the following Enersol products are required:
S11 - Male Reference Fitting ISO594/1 Figure 5 and/or
S12 - Female Reference Fitting ISO594/1 Figure 4
S15 - Force/Torque Fitting Assembly Machine
S17 - Air Leakage Test Machine

ISO 594/2 Air Leakage Test as defined in paragraph 4.2.2
To conduct the Air Leakage Test found in ISO 594/2 paragraph 4.2.2 the following Enersol products are required:
S07 - Male Reference Fitting ISO594/2 Figure 5 and/or
S09 - Female Reference Fitting ISO594/2 Figure 7
S15 - Force/Torque Fitting Assembly Machine
S17 - Air Leakage Test Machine

Price List:
Enersol ISO 594/1 Reference Fittings
Enersol ISO 594/2 Reference Fittings
Enersol Test Machines

Disclaimer
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents which are usually copyrighted documents. To purchase a copy of an engineering document visit an Authorized Reseller.

Comments:
Original Posting: 5/11/2013
Last Revision: 11/5/2014
Error corrections in, or comments about, the above data can be sent to: gageguy@gagecrib.com

 

About UsUsed SurplusTech InfoCatalogsContact UsBookmark
 

 

Top

Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583
CONTACT  FORMS & INFO

Copyright © 2002-2017 Ring & Plug Thread Gages. All rights reserved.