Ring & Plug Thread Gages  
 
Call 616 954 6581 for Thread Gages
About Ring & Plug Thread GagesUsed - Surplus Ring & Plug Thread GagesRing & Plug Thread Gage Technical InformationRing & Plug Thread Gage CatalogsContact Ring & Plug Thread GagesBookmark

 

 
 
 
 
 

Enersol Separation Force Test Machine

 
Video Image Viewer
 

ENERSOL SEPERATION FORCE TEST MACHINE for ISO 594 and ISO 80369

Separation Force Test Machine
The simple to use Enersol Separation Force Test Machine is made from anodized aluminum, hardened steel and plastic.The Separation Force Test Machine is designed to use a specialized low friction pneumatic cylinder that raises and lowers the sample under test. The Separation Force Test Machine is designed to apply a force of 25N and 35N to the sample under test and comes with a separable weight (25N + 10N).

The Separation Force Tester is required for tests such as those in ISO594-1 and ISO594-2. Other standards such as the ISO7864, ISO7886 series (Parts 1- 4) and ISO8537 also require the Separation Force Test Machine by way of requiring components of the test samples to comply with the clauses in ISO594-1 or ISO594-2.

Uses for the Separation Force Test Machine
Below is a list of tests which are best accomplished by using the Separation Force Test Machine.

ISO 594/1 Separation Force Test as defined in paragraph 4.4
To conduct the Separation Force Test found in ISO 594/1 paragraph 4.4 the following Enersol products are required:
S11 - Male Reference Fitting ISO594/1 Figure 5 and/or
S12 - Female Reference Fitting ISO594/1 Figure 4
S15 - Force/Torque Fitting Assembly Machine
S18 - Separation Force Test Machine

ISO 594/2 Separation Force Test as defined in paragraph 4.3
To conduct the Separation Force Test found in ISO 594/2 paragraph 4.3 the following Enersol products are required:
S08 - Male Reference Fitting ISO594/2 Figure 5 and/or
S10 - Female Reference Fitting ISO594/2 Figure 7
S15 - Force/Torque Fitting Assembly Machine
S18 - Separation Force Test Machine

Price List:
Enersol ISO 594/1 Reference Fittings
Enersol ISO 594/2 Reference Fittings
Enersol Test Machines

Disclaimer
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents which are usually copyrighted documents. To purchase a copy of an engineering document visit an Authorized Reseller.

Comments:
Original Posting: 5/11/2013
Last Revision: 9/12/2017
Error corrections in, or comments about, the above data can be sent to: gageguy@gagecrib.com

 

About UsUsed SurplusTech InfoCatalogsContact UsBookmark
 

 

Top

Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583
CONTACT  FORMS & INFO

Copyright © 2002-2017 Ring & Plug Thread Gages. All rights reserved.