ajmenu1 = new mainMenu('vertical', 0, 'transparent', 'transparent', '#FFFFFF', '#FF6133','button-back-anim6b.gif','right');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.divider = '
';
ajmenu1.fontStyle = 'italic';
ajmenu1.fontWeight = 'bold';
ajmenu1.htmlBefore = ' ';
ajmenu1.htmlAfter = ' ';
ajmenu1.cellpadding = 7;
ajmenu1.addItems('A: Catalogs', 'http://www.ring-plug-thread-gages.com/catalogs/index.html');
ajmenu1.addItems('B: ThreadTech Software', 'http://www.ring-plug-thread-gages.com/catalogs/thread_check/software.htm');
ajmenu1.addItems('C: Tech Info', 'http://www.ring-plug-thread-gages.com/tech_info.htm');
ajmenu1.addItems('D: Used/Surplus Gages', 'http://www.ring-plug-thread-gages.com/used-surplus.htm');
ajmenu1.addItems('E: General Data', 'http://www.ring-plug-thread-gages.com/tech_info.htm#data');
ajmenu1.addItems('F: Specifications', 'http://www.ring-plug-thread-gages.com/tech_info.htm#specs');
ajmenu1.addItems('G: UN-Series', 'http://www.ring-plug-thread-gages.com/tech_info.htm#un');
ajmenu1.addItems('H: M-Series', 'http://www.ring-plug-thread-gages.com/tech_info.htm#metric');
ajmenu1.addItems('I: Cylindrical/Plain', 'http://www.ring-plug-thread-gages.com/tech_info.htm#uns');
ajmenu1.addItems('J: American Pipe', 'http://www.ring-plug-thread-gages.com/tech_info.htm#pipe');
ajmenu1.addItems('K: British Pipe', 'http://www.ring-plug-thread-gages.com/tech_info.htm#British%20Standard');
ajmenu1.addItems('L: ACME', 'http://www.ring-plug-thread-gages.com/tech_info.htm#ACME');
ajmenu1.addItems('M: Thread Comparators', 'http://www.ring-plug-thread-gages.com/tech_info.htm#variable');
ajmenu1.addItems('N: Thread Data Charts', 'http://www.ring-plug-thread-gages.com/ti-thread-data-charts.html');
ajmenu1.addItems('O: Hole Location', 'http://www.ring-plug-thread-gages.com/tech_info.htm#variable');
ajmenu1.addItems('P: Medical Luer', 'http://www.medi-luer.com');
ajmenu1.addItems('Q: Step Pin Gage', 'http://www.ring-plug-thread-gages.com/ti-Step%20Pin%20Gage%20Design%20Page.htm');
ajmenu1.addItems('R: Thread Articles', 'http://www.ring-plug-thread-gages.com/tech_info.htm#Articles');
ajmenu1 = new subMenu('1', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 MTG Inc', 'http://www.ring-plug-thread-gages.com/catalogs/mtg/index.html');
ajmenu1.addItems('2 Osborn Products', 'http://www.ring-plug-thread-gages.com/catalogs/osborn/index.html');
ajmenu1.addItems('3 Reference Guide', 'http://www.ring-plug-thread-gages.com/ti_starret.pdf');
ajmenu1.addItems('4 Three Wire System', 'http://www.ring-plug-thread-gages.com/catalogs/thread_check/index.html');
ajmenu1.addItems('5 ThreadTech Software', 'http://www.ring-plug-thread-gages.com/catalogs/thread_check/software.htm');
ajmenu1.addItems('6 Medi-Luer', 'http://www.medi-luer.com');
ajmenu1.addItems('7 Regal Beloit', 'http://www.ring-plug-thread-gages.com/ti-DoG01-Index.htm');
ajmenu1.addItems('8 Gage Maker Supply', 'http://www.ring-plug-thread-gages.com/ti-GMS00-Gage-Makers-Supplies-Catalog-Index.htm');
ajmenu1 = new subMenu('2', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');
ajmenu1 = new subMenu('2i2', '#333333', '#333333', '#00FF40', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '8pt';
ajmenu1.fontWeight = 'bold';
ajmenu1 = new subMenu('2i3', '#333333', '#333333', '#00ff40', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '8pt';
ajmenu1.fontWeight = 'bold';
ajmenu1 = new subMenu('3', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');
ajmenu1 = new subMenu('4', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');
ajmenu1 = new subMenu('5', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 American Gage Design (AGD) Standardized Components', 'http://www.ring-plug-thread-gages.com/ti-GMS00-Gage-Makers-Supplies-Catalog-Index.htm');
ajmenu1.addItems('2 Dynamics of Gaging', 'http://www.ring-plug-thread-gages.com/ti-DoG01-Index.htm');
ajmenu1.addItems('3 Certification of Conformance vs. Long Form Certification', 'http://www.ring-plug-thread-gages.com/ti-LFC.htm');
ajmenu1.addItems('4 Gage Care Maintenance and Storage', 'http://www.ring-plug-thread-gages.com/ti-SW-gage-care-storage-maintenance.htm');
ajmenu1.addItems('5 GO does not GO and NOGO does GO', 'http://www.ring-plug-thread-gages.com/ti-GO-NOGOs-and-NOGO-GOs.htm');
ajmenu1.addItems('6 Minor and Major Diameter Questions', 'http://www.ring-plug-thread-gages.com/ti-Major-Minor-Diameters-Parts-vs-Gages.htm');
ajmenu1.addItems('7 Pitch Diameter', 'http://www.ring-plug-thread-gages.com/PDChart/index.html');
ajmenu1.addItems('8 Ring Gage Adjusting', 'http://www.ring-plug-thread-gages.com/ti-B47-Adjusting-Thread-Ring.htm');
ajmenu1.addItems('9 Ring Gage Calibration by Direct Measurement', 'http://www.ring-plug-thread-gages.com/ti-ring-calibration-direct-measurement.htm');
ajmenu1.addItems('10 Sealing Wax', 'http://www.ring-plug-thread-gages.com/ti-SW-Thread-Gage-Sealing-Wax.htm');
ajmenu1.addItems('11 Set Plug Tolerances', 'http://www.ring-plug-thread-gages.com/ti-set-plug-tolerances.htm');
ajmenu1.addItems('12 Set Plug Usage', 'http://www.ring-plug-thread-gages.com/ti-set-plug-using.htm');
ajmenu1.addItems('13 Terminology Related to Nuts and Bolts', 'http://www.ring-plug-thread-gages.com/terminology.htm');
ajmenu1.addItems('14 Thread Gaging Reference Guide', 'http://www.ring-plug-thread-gages.com/ti_starret.pdf');
ajmenu1.addItems('15 Why Gages Grow', 'http://www.ring-plug-thread-gages.com/ti-gg0-Gages-Grow.htm');
ajmenu1 = new subMenu('6', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');
ajmenu1 = new subMenu('7', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 N vs. UN', 'http://www.ring-plug-thread-gages.com/ti-N-vs-UN.htm');
ajmenu1.addItems('2 STI Gage Before or After Inserted', 'http://www.ring-plug-thread-gages.com/ti-sti-post-insert-gauging.htm');
ajmenu1.addItems('3 STI Gage Tolerances', 'http://www.ring-plug-thread-gages.com/ti-sti-Gage-Tolerances.htm');
ajmenu1.addItems('4 Unified National Thread: ANSI vs. BS vs. ISO vs. JIS', 'http://www.ring-plug-thread-gages.com/ti-UN-ANSI-vs-BS.htm');
ajmenu1.addItems('5 UN vs. UNC vs. UNF vs. UNEF vs. UNS', 'http://www.ring-plug-thread-gages.com/ti-UN-vs-UNC-vs-UNF-vs-UNEF-vs-UNS.htm');
ajmenu1.addItems('6 UNJ vs. UN', 'http://www.ring-plug-thread-gages.com/ti-UNJ-vs-UN.htm');
ajmenu1.addItems('7 UNR vs. UN', 'http://www.ring-plug-thread-gages.com/ti-UNR-vs-UN.htm');
ajmenu1 = new subMenu('8', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 Pitch Diameter Charts', 'http://www.ring-plug-thread-gages.com/PDChart/index.html');
ajmenu1.addItems('2 STI Gage Before or After Inserted', 'http://www.ring-plug-thread-gages.com/ti-sti-post-insert-gauging.htm');
ajmenu1.addItems('3 STI Gage Tolerances', 'http://www.ring-plug-thread-gages.com/ti-sti-Gage-Tolerances.htm');
ajmenu1 = new subMenu('9', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.cellpadding = 3;
ajmenu1.fontSize = '9pt';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 Gage Makers Tolerance Calculator and Charts', 'http://www.ring-plug-thread-gages.com/ti-Gage-Makers-Tol-Calculator-ANSI-B89.1.5.htm');
ajmenu1.addItems('2 GO or NOGO or Master', 'http://www.ring-plug-thread-gages.com/ti-cyl-GO-vs-NOGO-vs-Master-Plain-Gauge.htm');
ajmenu1.addItems('3 Nominal Size', 'http://www.ring-plug-thread-gages.com/ti-cyl-Nominal-Size-Plain-Gage.htm');
ajmenu1 = new subMenu('10', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 Designations of American National Pipe Types', 'http://www.ring-plug-thread-gages.com/ti-npt-designations.htm');
ajmenu1.addItems('2 Before Plate Pipe Gages', 'http://www.ring-plug-thread-gages.com/ti-NTP-Before-Plate-Gages.htm');
ajmenu1.addItems('3 Gages: Pipe Plug', 'http://www.ring-plug-thread-gages.com/ti-DoG07-Pipe-Plug.htm');
ajmenu1.addItems('4 Gages: Pipe Ring', 'http://www.ring-plug-thread-gages.com/ti-DoG08-Pipe-Ring.htm');
ajmenu1.addItems('5 How to Use: NPT; ANPT; NPTF', 'http://www.ring-plug-thread-gages.com/catalogs/osborn/osborn-taper-pipe-thread-gages.htm');
ajmenu1.addItems('6 NPSF into NPSM', 'http://www.ring-plug-thread-gages.com/ti-bs-21-ISO-7-Dry-Seal.htm');
ajmenu1.addItems('7 NPT vs. ANPT', 'http://www.ring-plug-thread-gages.com/ti-NPT-vs-ANPT.htm');
ajmenu1.addItems('8 NGT vs. NPT', 'http://www.ring-plug-thread-gages.com/ti-npt-NGT-vs-NPT.htm');
ajmenu1.addItems('9 NPT vs. NPTF', 'http://www.ring-plug-thread-gages.com/ti-NPT-vs-NPTF.htm');
ajmenu1 = new subMenu('11', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 BS-2779', 'http://www.ring-plug-thread-gages.com/ti-bs-2779.htm');
ajmenu1.addItems('2 BS-21', 'http://www.ring-plug-thread-gages.com/ti-bs-21.htm');
ajmenu1.addItems('3 BS-21 Rp into R', 'http://www.ring-plug-thread-gages.com/ti-bs-21-ISO-7-Dry-Seal.htm');
ajmenu1.addItems('4 BS-21 System A vs. System B', 'http://www.ring-plug-thread-gages.com/ti-bs-System-A-vs-B.htm');
ajmenu1.addItems('5 DIN-2999', 'http://www.ring-plug-thread-gages.com/ti-bs-din-2999.htm');
ajmenu1.addItems('6 EN-10226', 'http://www.ring-plug-thread-gages.com/ti-bs-EN-10226.htm');
ajmenu1.addItems('7 ISO-7', 'http://www.ring-plug-thread-gages.com/ti-bs-ISO-7.htm');
ajmenu1.addItems('8 ISO-7 Rp into R', 'http://www.ring-plug-thread-gages.com/ti-bs-21-ISO-7-Dry-Seal.htm');
ajmenu1.addItems('9 ISO-228', 'http://www.ring-plug-thread-gages.com/ti-bs-ISO-228.htm');
ajmenu1.addItems('10 ISO-228 Class A vs. Class B', 'http://www.ring-plug-thread-gages.com/ti-bs-Class%20A-vs-B.htm');
ajmenu1.addItems('11 Rp vs. G', 'http://www.ring-plug-thread-gages.com/ti-bs-Rp-vs-G.htm');
ajmenu1.addItems('12 Rs vs. G', 'http://www.ring-plug-thread-gages.com/ti-bs-Rs-vs-G.htm');
ajmenu1.addItems('13 Full Form vs. Truncated or Modified', 'http://www.ring-plug-thread-gages.com/ti-bs-Full-Form-vs-Truncated-Modified.htm');
ajmenu1.addItems('14 ISO-7 vs. BS-21', 'http://www.ring-plug-thread-gages.com/ti-bs-ISO-7-vs-BS-21.htm');
ajmenu1.addItems('15 Designations of British Screw Thread Types', 'http://www.ring-plug-thread-gages.com/ti-bsp-designations.htm');
ajmenu1.addItems('16 DIN-240-1923 vs BS-84', 'http://www.ring-plug-thread-gages.com/ti-DIN%20240%20vs%20BS%2084.htm');
ajmenu1.addItems('17 Whitworth Thread Form', 'http://www.ring-plug-thread-gages.com/ti-bs-Whitworth-screw-thread-form.htm');
ajmenu1 = new subMenu('12', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 The World of ACME Screw Threads', 'http://www.ring-plug-thread-gages.com/ti-ACME-World.htm');
ajmenu1.addItems('2 Centralizing ACME Screw Threads', 'http://www.ring-plug-thread-gages.com/ti-ACME-Centralizing.htm');
ajmenu1.addItems('3 General Purpose ACME Screw Threads', 'http://www.ring-plug-thread-gages.com/ti-ACME-General-Purpose-Thread-Data.htm');
ajmenu1.addItems('4 Stub ACME Screw Threads', 'http://www.ring-plug-thread-gages.com/ti-ACME-Stub.htm');
ajmenu1 = new subMenu('13', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 MTG Catalog', 'http://www.ring-plug-thread-gages.com/catalogs/mtg/index.html');
ajmenu1.addItems('2 Snap Gages, Threaded, Knife Edge Style, Maintenance', 'http://www.ring-plug-thread-gages.com/ti-CG-Knife-Edge-Maintenance.htm');
ajmenu1.addItems('3 Starrett no longer sells thread comparators', 'http://www.ring-plug-thread-gages.com/ti-Starrett-1120.htm');
ajmenu1.addItems('4 Starret Technical Info', 'http://www.ring-plug-thread-gages.com/ti_starret.pdf');
ajmenu1.addItems('5 Why Use Thread Snap Gages', 'http://www.ring-plug-thread-gages.com/ti-CG-Why-Use-Thread-Snap-Gages.htm');
ajmenu1 = new subMenu('14', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');
ajmenu1 = new subMenu('15', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 Overview', 'http://www.ring-plug-thread-gages.com/ti-hole-location-overview.htm');
ajmenu1.addItems('2 Flexible Style', 'http://www.ring-plug-thread-gages.com/ti-hole-location-flexible.htm');
ajmenu1.addItems('3 Solid Style', 'http://www.ring-plug-thread-gages.com/ti-hole-location-solid.htm');
ajmenu1.addItems('4 Tapered Style', 'http://www.ring-plug-thread-gages.com/ti-hole-location-tapered.htm');
ajmenu1.addItems('5 Lead Lock Style', 'http://www.ring-plug-thread-gages.com/ti-hole-location-leadlock.htm');
ajmenu1.addItems('6 Variable Style', 'http://www.ring-plug-thread-gages.com/ti-hole-location-variable.htm');
ajmenu1 = new subMenu('16', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('1 General Data', 'http://www.medi-luer.com');
ajmenu1.addItems('2 ISO 594/1', 'http://www.ring-plug-thread-gages.com/catalogs/luer_fittings/ISO-594-1.html');
ajmenu1.addItems('3 ISO 594/2', 'http://www.ring-plug-thread-gages.com/catalogs/luer_fittings/ISO-594-2.html');
ajmenu1.addItems('4 ISO 8638', 'http://www.ring-plug-thread-gages.com/catalogs/luer_fittings/ansi_standards.html#ISO8638');
ajmenu1.addItems('5 ANSI/HIMA MD70.1', 'http://www.ring-plug-thread-gages.com/catalogs/luer_fittings/ANSI-HIMA-MD70.1-1983.htm');
ajmenu1.addItems('6 ISO 5356-1', 'http://www.ring-plug-thread-gages.com/catalogs/luer_fittings/ISO-5356.html');
ajmenu1.addItems('7 ASTM F 1054', 'http://www.ring-plug-thread-gages.com/catalogs/luer_fittings/ansi_standards.html#ASTM');
ajmenu1 = new subMenu('17', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');
ajmenu1 = new subMenu('18', '#333333', '#333333', '#FFFFFF', '#FF6133');
ajmenu1.menuborder = '1px solid #00FF00';
ajmenu1.htmlBefore = '';
ajmenu1.htmlAfter = '';
ajmenu1.fontWeight = 'bold';
ajmenu1.addItems('', '');