Ring & Plug Thread Gages  
 
Call 616 954 6581 for Thread Gages
About Ring & Plug Thread GagesUsed - Surplus Ring & Plug Thread GagesRing & Plug Thread Gage Technical InformationRing & Plug Thread Gage CatalogsContact Ring & Plug Thread GagesBookmark

 

 

 

 

ANSI/HIMA MD70.1 Medical Luer Fitting Gages


ANSI/HIMA MD70.1 American National Standard for Medical Material – Luer Taper Fittings – Performance expired in 1989. The specification was superceded by ISO 594/1 and ISO 594/2 which in 2016 were fully replaced by ISO 80369-7. To assure product interconnectivity you should only purchase ISO 80369-7 Gages and Reference Connectors (Fittings).
Read: Discussion on the replacements.


Click on picture
for full image.

ANSI/HIMA MD70.1 Fig 4

Call for price,
or replace with:
ISO 80369-7

 

(16K) Photo of Luer Ring Gage  per ANSI HIMA MD-70.1 Figure 4.
Video & Pics

Gage for Rigid and Non-rigid
Male Luer Slip Fittings

ANSI/HIMA MD70.1 Fig 5

Call for price,
or replace with:
ISO 80369-7

 

(3K) Photo of Luer Ring Gage  per ANSI HIMA MD-70.1 Figure 5.
Video & Pics

Gage for Rigid and Non-rigid
Female Luer Slip Fittings

ANSI/HIMA MD70.1 Fig 6A

Call for price,
or replace with:
ISO80369-7 Fig C.5

 

 

AFig6A.JPG (3502 bytes)
Video & Pics

Water Leakage Test Fitting
for the Male Luer Slip Fittings

ANSI/HIMA MD70.1 Fig 6B

Call for price,
or replace with:
ISO80369-7 Fig C.2

 

 

AFig6B.JPG (5064 bytes)
Video & Pics

Water Leakage Test Fitting
for the Female Luer Slip Fittings

ANSI/HIMA MD70.1 Fig 8 size 7.73

No longer available,
so replace with:
ISO80369-7 Fig C.1

 

fig8.jpg (21515 bytes)
Video & Pics

 

Water Leakage Test Fitting
for Male Luer Locks

ANSI/HIMA MD70.1 Fig 8 size 7.83

No longer available,
so replace with:
ISO80369-7 Fig C.1

 

fig8.jpg (21515 bytes)
Video & Pics

 

Water Leakage Test Fitting
for Male Luer Locks

ANSI/HIMA MD70.1 Fig 9

No longer available,
so replace with:
ISO80369-7 Fig C.4

 

AFig9.JPG (5608 bytes)
Video & Pics

Water Leakage Test Fitting
for Female Luer Locks

 

Disclaimer:
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents: ISO594/1:1986; ISO 594/2:1998; ISO80369-7:2016; and ISO80369-20:2015; which are copyrighted documents. 
To purchase copies visit an Authorized Reseller.

 

Comments:
Original Posting: 8/5/2008
Last Revision: 10/3/2017
Error corrections in, or comments about, the above data can be sent to: office@gagecrib.com

 

About UsUsed SurplusTech InfoCatalogsContact UsBookmark
 

 

Top

Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583
CONTACT  FORMS & INFO

Copyright © 2002-2019 Ring & Plug Thread Gages. All rights reserved.