ISO-80369-7 Fig C.5 Female Reference Luer Slip Connector

ISO 80369-7 FIGURE C.5 FEMALE REFERENCE LUER SLIP CONNECTOR

ISO 80369-7:2016 cancels and replaces the first edition ISO 594-1:1986 and the second edition of ISO 594-2:1998, clauses, subclauses, tables, figures, and annexes of which have been consolidated and technically revised.

Compatibility/Interchangeability Between ISO 594/1 Figure 4 and ISO 80369-7 Figure C.5
The ISO 594/1 Figure 4 Female Reference Conical Fitting is replaced by ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector. The ISO 80369-7 Figure C.5 is not identical to the ISO 594/1 Figure 4 Reference Fitting; so it cannot be certified as ISO 80369-7 Figure C.5. The good news is that the ISO 80369-7 Figure C.5 Female Reference Luer Slip Connector is backward compatible with the ISO 594/1 Figure 4 Reference Fitting; so it can be certified and used in ISO 594/1 designated testing. For those who just need to know the full details; the minimum conical length changed from the ISO 594/1 Figure 4 requirement of 7.5mm minimum; to the ISO 80369-7 Figure C.5 requirement of 10.5mm minimum. I think it is obvious to see that an ISO 80369-7 Figure C.5 Female Reference Luer Slip Connector with a certified minimum length of 10.5 will always meet the ISO 594/1 Figure 4 Female Reference Conical Fitting minimum requirement of 7.5mm minimum.

ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector
The ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector is used in the ISO 80369-7 specified tests of the ISO 80369-7 Luer Male 6% Conical Medical Connectors. Keeping with the requirements of ISO 80369-7; the ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector is made from hardened stainless steel.

The ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector has design details which are not specified in ISO 80369-7 and which allow connection to test equipment. These design details vary by manufacturer.

The ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector is an integral part of Luer needle and syringe testing and is. The ISO 80369-7 Fig C.5 Female Reference Luer Slip Connector is assembled to samples for tests such as liquid leakage, air leakage, separation force, and stress cracking.

Price List:
Alamo ISO 594/1 Reference Fittings
Medi-Luer ISO 594/1 Reference Fittings
Enersol ISO 594/1 Reference Fittings
Alamo ISO 594/2 Reference Fittings
Enersol ISO 594/2 Reference Fittings
Enersol Test Machines

Disclaimer:
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents: ISO594/1:1986; ISO 594/2:1998 and ISO80369-7:2014; which are copyrighted documents. To purchase copies visit an Authorized Reseller.

Comments:
Original Posting: 9/11/2014
Last Revision: 12/16/2016
Error corrections in, or comments about, the above data can be sent to: office@gagecrib.com