Ring & Plug Thread Gages  
Call 616 954 6581 for Thread Gages
About Ring & Plug Thread GagesUsed - Surplus Ring & Plug Thread GagesRing & Plug Thread Gage Technical InformationRing & Plug Thread Gage CatalogsContact Ring & Plug Thread GagesBookmark





EN 1707; Locking Conical Fittings with 6% (Luer) Taper


EN-1707; Conical Fittings with a 6% (Luer) Taper for Syringes, Needles and certain other Medical Equipment – Lock Fittings

EN 1707 Scope
EN-1707 specifies requirements for conical lock fittings with a 6 % (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use, e.g. transfusion equipment. The requirements apply to fittings made of rigid and of semi-rigid materials and include test methods using specified Reference Fittings, but exclude provision for more flexible or elastomeric materials.

EN-1707 = ISO 594-2
EN 1707 does not clearly state that it is equivalent to ISO-594-2. From my comparison of the two standards they appear to be technically equivalent. My saying this does not make it official. I suggest that you purchase both EN-1707 and ISO 594/2 and make your own

This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root document: EN 1707 and ISO-594/2; which is a copyrighted documents. To purchase copies visit an Authorized Reseller.

Original Posting: 11/29/2012
Last Revision: 4/1/2013
Error corrections in, or comments about, the above data can be sent to: office@gagecrib.com

About UsUsed SurplusTech InfoCatalogsContact UsBookmark



Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583

Copyright © 2002-2019 Ring & Plug Thread Gages. All rights reserved.