Ring & Plug Thread Gages  
Call 616 954 6581 for Thread Gages
About Ring & Plug Thread GagesUsed - Surplus Ring & Plug Thread GagesRing & Plug Thread Gage Technical InformationRing & Plug Thread Gage CatalogsContact Ring & Plug Thread GagesBookmark





Medical Luer Fittings Gages


Medi-Luer Medical Connector Gages and Reference Fittings

Medi-Luer Gages are made of 400 series stainless steel. The 400 series stainless steel has better rust resistance than standard tool steel. The hardness of 400 series stainless steel is just below that of standard tool steel, and well above most medical luer materials. These properties make this gage well suited for clean-room applications. Medi-Luer Medical Connector Gages are made to the most recent version of ISO 594/1; ISO 5356-1; ISO 8185; ISO 8638; ISO 80369-3; ISO 80369-6; and ISO 80369-7 with gage members and handles following American Gage Design (AGD) standards when ever possible.

Medi-Luer Medical Connector Gages and Reference Fittings are supplied with Medi-Luer’s certification at no additional cost. Medi-Luer is not ISO Registered. For an extra fee Medi-Luer's Gages adn Reference Fittings can be certified by an ISO 17025 Registered Calibration Laboratory with Medical Connector Gages and Reference Fittings listed in their Scope.

Medi-Luer Product Prices:
ISO 594/1
ISO 5356-1
ISO 8185
ISO 8638
ISO 80369-3
ISO 80369-6
ISO 80369-7

Original Posting: 12/19/2012
Last Revision: 11/16/2015
Error corrections in, or comments about, the above data can be sent to: office@gagecrib.com

About UsUsed SurplusTech InfoCatalogsContact UsBookmark



Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583

Copyright © 2002-2019 Ring & Plug Thread Gages. All rights reserved.