ASTM F1054 Standard Specification for Conical Fittings
Withdrawn May 2005:
Withdrawn Standard: ASTM F1054
-01 Standard Specification for Conical Fittings (Withdrawn May 2005) and replaced by ISO 5356-1. If your drawing specifies ASTM F1045 you are now to use ISO 5356-1. Formerly under the jurisdiction of ASME Committee F29 on Anesthetic and Respiratory Equipment, this specification was withdrawn in May 2005 and replaced with the adoption of ISO 5356-1 as an American National Standard.
Withdrawn Rationale:
This specification specifies dimensions and gaging requirements for cones and sockets intended for connecting anesthetic and respiratory care equipment including, but not limited to, breathing systems (resuscitators, ventilators, and anesthesia gas machines), anesthetic gas scavenging systems, and vaporizers. All of the gages are identical between the two standards except the 30mm plug and ring test gages for conical connectors made of materials other than metal.
1. Scope
1.1 - This specification specifies dimensions and gaging requirements for cones and sockets intended for connecting anesthetic and respiratory care equipment including, but not limited to, breathing systems (resuscitators, ventilators, and anesthesia gas machines), anesthetic gas scavenging systems, and vaporizers. This specification gives requirements for the following cones and sockets:
1.1.1 - 15- and 22-mm sizes intended for general use in breathing systems;
1.1.2 - 22-mm size latching connectors (including performance requirements) intended for general use in breathing systems ;
1.1.3 - 23-mm size intended for use with vaporizers intended for use outside the breathing system; and
1.1.4 - 30-mm size intended for the connection of a breathing system to an anesthetic gas scavenging system.
1.2 - It is expected that standards for particular medical devices will provide details on the application and implementation of these conical connectors.
Gage Prices for
ASTM F1054 or ISO5356-1
All of the gages are identical between the two standards except the 30mm plug and ring test gages for conical connectors made of materials other than metal. To assure interconnectivity you should only purchase ISO5356-1 gages.
Disclaimer
This information given is my opinion from my study of the standards. I have no authority and my opinion thus has no value. If you intend on acting on this information; I suggest that you purchase the official engineering documents from an Authorized Reseller and make your own engineering evaluation of the facts.
COMMENTS
Original Posting: 9/5/2012
Last Revision: 7/21/2017
Error corrections in or comments about the above data can be sent to: office@gagecrib.com
Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583 CONTACT FORMS & INFO