ENERSOL S17A AIR LEAK TEST MACHINE for ISO 80369 (ISO 594)
NOTE:
ISO 594 has been rescinded and replaced by ISO 80369-7. Because of the change from ISO 594 into ISO 80369-7; all tests per ISO 594 should now be switched to tests per ISO 80369-7 (ISO 80369-20).
NOTE: The Enersol Model S17A Subatmospheric Pressure Air Leakage Tester was adapted from the previous Enersol Model S17 Air Leakage Tester to be compatable with ISO 80369-20 requirements. This upgraded version is to be considered useable, but not recommended, for use with ISO 80369-20. To better rmeet the requiremnts of ISO 80369-20; Enersol suggests the Enersol Model S78 Automated Subatmospheric Pressure Air Leakage Tester be selected. The the Enersol Model S78 Automated Subatmospheric Pressure Air Leakage Tester is backward compatible to ISO 594.
Air Leakage Test Machine
The Enersol Air Leakage Test Machine is designed to be
compact and easy to operate. The Air Leakage Test Machine is made from
anodized aluminum and plastic components.
The Air Leakage Test Machine requires a vacuum pump capable of -100kPa
which Enersol typically supplies (110-220V DC).
The Air Leakage Test Machine has an integral pressure gauge which
comes with a calibration certificate.
The Air Leakage Test Machine is required for leakage and
performance tests such as those defined in ISO594-1, ISO594-
2, ISO7886 series (Parts 1-4) ISO8537 and ISO 80369-20.
Other standards such as ISO7864 also require the Air Leakage Test Machine by way of requiring components of
the test samples to comply with the clauses in ISO594-1 or ISO594-2.
Uses for the Air Leakage Test Machine
Below is a list of tests which are best accomplished by using the Air Leakage Test Machine.
Disclaimer
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents which are usually copyrighted documents. To purchase a copy of an engineering document visit an Authorized Reseller.
Comments:
Original Posting: 5/11/2013
Last Revision: 10/31/2017
Error corrections in, or comments about, the above data can be sent to: office@gagecrib.com
Gage Crib Worldwide, Inc.
6701 Old 28th St SE, Suite B
Grand Rapids, MI 49546-6937
Phone: 001-616-954-6581 • Fax: 001-616-954-6583 CONTACT FORMS & INFO